Pragati Enterprises

We are offering  MPR4 Series Network Analyzers to our clients with very good quality and reasonable price.

We are offering  MPR5 Series Network Analyzers to our clients.These products are processed with utmost care under the guidance of skilled professionals from the respective field. 

The product has a 8 digit LCD display with backlit. It continuously displays kWh parameter. The kWh display is resettable using key function. It has rich high frequency led pulse output in front facia.

Features:

• True Rms measurement.
• Accuracy class 1s.
• Accurate reading for balanced as well as unbalanced loads.
• Optically isolated open collector pulse output.
• LCD display with yellow green backlit.
• Phase available indication provided.
• Phase reverse indication provided.
• 8 digits for direct kWh reading.
• On site programmable CT ratio and PT ratio, Meter Id.
• Reliable performance at Low Current(>5% of load).
• Potential free pulse output for energy.
• Flush mounting compact design.
• Four switch for programming functions on front side.
• Energy reset and password protection.
• Old register to store the previously cleared energy value.
• Once CTR, PTR programmed,the meter displays direct reading of kWh.
• Rs-485 modbus communication RTU protocol.

Relevant Standard:

• EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
• Protection : Ip52 Front / Ip20 Terminal block.

Environment:

• Ambient: -10° C to 55° C
• Storage: -20° C to 70° C.
• Humidity: <95% RH - Non condensing.

Mechanical Dimensions:

• Front : 96mm x 96mm / Depth 54mm
• Panel Cut Out : 91mm x 91mm +- 0.1mm
• Casing : Flame retardant ABS.
• Connector : ABS & Pcb terminal block. 
• Weight 450gm approximately.

Pulse Output:

• 1pulse = 10 Wh x External CT ratio x External PT ratio.
• Open collector pulse output.
• External resistance to be used Dc supply and ‘+’ point.
• External resistance value will vary depends on external voltage of 5V to 24V, which is given by user.
• External resistance for 24 Dc is 6.4kilo ohm.

Applications:

• Commercial and Industrial Sub Metering.
• Special oem application.
• Control and relay panels.
• Genset, Solar applications, Ups.
• Switch gear panels.
• Scada, BMS(Building management systems)

The product has a 8 digit LCD display with backlit. It continuously displays kWh parameter. The kWh display is resettable using key function. It has rich high frequency led pulse output in front facia.

Features:

• True Rms measurement.
• Accuracy class 1s.
• Accurate reading for balanced as well as unbalanced loads.
• Accurate reading even under rapid fluctuation.
• LCD display with yellow green backlit.
• Phase available indication provided.
• Phase reverse indication provided.
• 8 digits for direct kWh reading.
• On site programmable CT ratio and PT ratio, Meter Id.
• Reliable performance at Low Current(>5% of load).
• Potential free pulse output for energy.
• Flush mounting compact design.
• Four switch for programming functions on front side.
• Energy reset and password protection.
• Old register to store the previously cleared energy value.
• Once CTR, PTR programmed,the meter displays direct reading of kWh.

Relevant Standard:

• EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
• Protection: Ip52 Front / Ip20 Terminal block.

Environment:

• Ambient: -10° C to 55° C
• Storage: -20° C to 70° C.
• Humidity: <95% RH - Non condensing.

Mechanical Dimensions:

• Front: 96mm x 96mm / Depth 54mm
• Panel Cut Out: 91mm x 91mm +- 0.1mm
• Casing: Flame retardant ABS
• Connector: ABS & Pcb terminal block. 
• Weight 250gm approximately.

Pulse Output:

• 1pulse = 10 Wh x External CT ratio x External PT ratio.
• Open collector pulse output.
• External resistance to be used Dc supply and ‘+’ point.
• External resistance value will vary depends on external voltage of 5V to 24V, which is given by user.
• External resistance for 24 Dc is 6.4kilo ohm.

Applications:

• Commercial and Industrial Sub Metering.
• Special oem application.
• Control and relay panels.
• Genset, Solar applications, Ups.

The product has a 8 digit LCD display with backlit. It continuously displays kWh parameter. The kWh display is resettable using in front key function. It has rich high frequency led pulse output in front facia.

Features:

• True Rms measurement.
• Accuracy class 1s.
• Accurate reading for balanced as well as unbalanced loads.
• Accurate reading even under rapid fluctuation.
• LCD display with yellow green backlit.
• Phase available indication provided.
• Phase reverse indication provided.
• 8 digits for direct kWh reading.
• On site programmable CT ratio and PT ratio, Meter Id.
• Reliable performance at Low Current(>5% of load).
• Potential free pulse output for energy.
• Flush mounting compact design.
• Four switch for programming functions on front side.
• Energy reset and password protection.
• Old register to store the previously cleared energy value.
• Once CTR, PTR programmed,the meter displays direct reading of kWh.

Relevant Standard:

• EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
• Protection : Ip52 Front / Ip20 Terminal block.

Environment:

• Ambient: -10° C to 55° C
• Storage: -20° C to 70° C.
• Humidity: <95% RH - Non condensing.

Mechanical Dimensions:

• Front: 96mm x 96mm / Depth 54mm
• Panel Cut Out: 91mm x 91mm +- 0.1mm
• Casing: Flame retardant ABS
• Connector: ABS & Pcb terminal block. 
• Weight 450gm approximately.

Applications:

• Commercial and Industrial Sub Metering.
• Special oem application.
• Control and relay panels.
• Genset, Solar applications, Ups.
• Switch gear panels.
• Scada, BMS (Building management systems)