Pragati Enterprise
Mulund West, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Multi Function Meter

Leading Wholesale Trader of dt-108 digital multifunction meter, dt-108 energy multifunction meter, dt-36m 3 phase multifunction meter, em-34 multifunction power meter and em-34l nippen multifunction meter from Mumbai.

DT-108 Digital Multifunction Meter

DT-108  Digital Multifunction Meter
  • DT-108  Digital Multifunction Meter
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
CT Ratio5-9999A AC (only primary to be set)
Auxiliary Supply230VAC default (+20%) 50Hz
System3phase 4wire / 3phase 3wire / 1phase 2 wire.
Power ConsumptionLess than 0.1VA in Current Circuit, Less than 0.1 VA in Voltage.
Current50mA-6A AC
Relay Rating5Amps 250Vac.
PT Ratio110v to 500kv / 110v
Operating Voltage80 - 500 V AC Line to Line at 45-65 Hz.
Burden0.2VA per phase & less than 3VA max on Auxiliary supply
Dielectric Strength2 kv for 1min
BrandNippen

Our range of three-phase multi-function digital panel meters for measurement of electrical in industrial and commercial accurate and reliable parameters (voltage, current, power, frequency, etc) applications. It has a large multi-line Red LED display which enables three parameters to be displayed at the same time.

Features:
  • Accuracy class 1s.True RMS measurements with perfect linear response.3rows of (14.2mm)7 segment led 4digit bright red display.
  • 8 digit for energy.
  • On site programmable CT ratio, PT ratio.
  • V,A,PF all 3 phases can be viewed simultaneously.
  • Wide range of auxiliary supplies.
  • Reliable performance at Low Current(>5% of load).
  • Password Protection for setup mode.Single relay output for multiple alarms.
  • Finger proof self lifting terminals for connection of wiring.
  • Auto scaling of kilo, mega led.

Relevant Standard:
  • EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
  • Protection: Ip52 Front / Ip20 Terminal block.

Programmable Setting:
  • CT Ratio Primary to be set,
  • PT Ratio, Meter ID, MD, Password.
  • Auto/Manual Scroll ON & OFF Mode.

Parameters Displayed:
  • VLN, VLL, Ampere, Frequency & Average , RPM.
  • Active Power kW, Apparent Power kVA, Reactive Power(kVAr) Total.
  • Active energy, Apparent energy, Power Factor (PF) , Average.
  • On hours, Minimum & Maximum of VLN, VLL, Amps, Hz.

Optional Features:
  • RS-485 serial output port with standard Modbus Rtu protocol.
  • Single relay output to set over, under limit.

Mechanical Dimensions:
  • Front: 96mm x 96mm / Depth 54mmPanel Cut Out : 91mm x 91mm
  • Casing: Flame retardant ABS.
  • Connector: ABS & Pcb terminal block.

Applications:
  • Commercial and Industrial Sub Metering.
  • Switch gear panels.Control and relay panels.
  • Power Control panels and Motor Control panels.
  • Scada, Building Management system(BMS).
Request
Callback
Yes! I am Interested
View PDF

DT-108 Energy Multifunction Meter

DT-108 Energy Multifunction Meter
  • DT-108 Energy Multifunction Meter
Get Best Quote
Approx. Price: Rs 900 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
CT Ratio5-9999A AC (only primary to be set)
Auxiliary Supply230VAC default (+20%) 50Hz.
Relay Rating5Amps 250Vac
Current50mA-6A AC
PT Ratio11kv , 22kv, 33kv , 66kv / 110v
Operating Voltage80 - 500 V AC Line to Line at 45-65 Hz
Power ConsumptionLess than 0.1VA in Current Circuit, Less than 0.1 VA in Voltage
Burden0.2VA per phase & Less than 3VA max on Auxiliary supply.
Dielectric Strength2 kv for 1min
BrandNippen

Our range of three-phase multi-function digital panel meters for measurement of electrical in industrial and commercial accurate and reliable parameters (voltage, current, power, frequency, etc) applications. It has a single line Red LED display which enables all parameters to be displayed.

Features:
  • Accuracy class 1s.
  • True RMS measurements with perfect linear response.
  • Single row of (10mm)7 segment led 4digit bright red display.
  • 68 digit for energy.On site programmable CT ratio, PT ratio.
  • Wide range of auxiliary supplies.
  • Reliable performance at Low Current(>5% of load).
  • Password Protection for setup mode.
  • Finger proof self lifting terminals for connection of wiring.
  • Auto scaling of kilo, mega led.

Relevant Standard:
  • EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
  • Protection: Ip52 Front / Ip20 Terminal block.

Programmable Setting:
  • CT Ratio Primary to be set,
  • PT Ratio, Meter ID, MD, Password.
  • Auto/Manual Scroll ON & OFF Mode.

Parameters Displayed:
  • VLN, VLL, Ampere, Frequency & Average , RPM.
  • Active Power kW , Apparent Power kVA, Reactive Power(kVAr) Total.
  • kWh, kVAh, Power Factor (PF) , Average , On hours.

Optional Features:
  • RS-485 serial output port with standard Modbus Rtu protocol.

Mechanical Dimensions:
  • Front: 96mm x 96mm / Depth 54mm
  • Panel Cut Out: 91mm x 42mm +- 0.1mm
  • Casing: Flame retardant ABS.
  • Connector: ABS & Pcb terminal block.

Applications:
  • Commercial and Industrial Sub Metering.
  • Switch gear panels.
  • Control and relay panels.
  • Power Control panels and Motor Control panels.
  • Scada, Building Management system(BMS).

Other Details:
  • Measurement of all voltages and currents, power.
  • Single line LED bright red display .
  • Accuracy class 1s(IEC 1036/CBIP 88).
  • Optional RS 485 port modbus RTU protocol.
    Request
    Callback
    Yes! I am Interested
    View PDF

    DT-36M 3 Phase Multifunction Meter

    DT-36M 3 Phase Multifunction Meter
    • DT-36M 3 Phase Multifunction Meter
    Get Best Quote
    Approx. Price: Rs 1,200 / PieceGet Latest Price

    Product Details:

    Minimum Order Quantity1 Piece
    Maximum Overload Voltage1.2 times rated continuous
    Maximum Overload Current2 times rated continuous
    Current50mA-6A AC
    Auxiliary Supply230VAC default (+20%) 50Hz
    CT Ratio5-5000A AC (only primary to be set)
    Power ConsumptionLess than 0.1VA in Current Circuit, Less than 0.1 VA in Voltage.
    Operating Voltage80 - 500 V AC Line to Line at 45-65 Hz
    System3phase 4wire / 3phase 3wire / 1phase 2 wire
    Burden0.2VA per phase & Less than 3VA max on Auxiliary supply.
    Dielectric Strength2 kv for 1min
    BrandNippen

    Our range of three-phase VAF digital panel meters for measurement of electrical in industrial and commercial accurate and reliable parameters (voltage, current, frequency,) applications. It has a large multi-line Red LED display which enables three parameters to be displayed at the same time.

    Features:
    • Accuracy class 1s.
    • True RMS measurements with perfect linear response.
    • 3rows of (14.2mm)7 segment led 4digit bright red display . 3rows of (14.2mm)7 segment led 3digit bright red display .
    • On site programmable CT ratio.
    • V,A,PF all 3 phases can be viewed simultaneously.
    • Wide range of auxiliary supplies.
    • Reliable performance at Low Current(>5% of load).
    • Finger proof self lifting terminals for connection of wiring.

    Relevant Standard:
    • EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
    • Protection: Ip52 Front / Ip20 Terminal block.

    Programmable Setting:
    • CT Ratio Primary to be set,
    • Auto/Manual Scroll ON & OFF Mode.

    Parameters Displayed:
    • Voltage LN, LL, Average.
    • Ampere and Average .
    • Frequency

    Mechanical Dimensions:
    • Front: 96mm x 96mm / Depth 54mm
    • Panel Cut Out: 91mm x 42mm +- 0.1mm
    • Casing: Flame retardant ABS.
    • Connector: ABS & Pcb terminal block.

    Applications:
    • Switch gear panels.
    • Control and relay panels.
    • Power Control panels and Motor Control panels.
    Request
    Callback
    Yes! I am Interested
    View PDF

    EM-34 Multifunction Power Meter

    EM-34 Multifunction Power Meter
    • EM-34 Multifunction Power Meter
    Get Best Quote
    Approx. Price: Rs 1,200 / PieceGet Latest Price

    Product Details:

    Minimum Order Quantity1 Piece
    Operating Voltage 80 - 500 V AC Line to Line at 45-65 Hz
    Current50mA-6A AC
    Power ConsumptionLess than 0.4VA in Current Circuit, Less than 0.4VA in Voltage.
    Auxiliary SupplySelf Powered
    Power Factor0.8lead, Unity, 0.5lag
    System3phase 4wire / 3phase 3wire / 1phase 2 wire
    CT Ratio5-9999A AC (only primary to be set).
    BrandNippen

    The product has a 61/2 digit counter display. It continuously displays kWh parameter. The kWh display is non resettable stepper counter. It has rich high frequency led pulse output in front facia.

    Features:
    • Accuracy class 1s.
    • Accurate reading for balanced as well as unbalanced loads.
    • Accurate reading even under rapid fluctuation.
    • Mechanical counter display.
    • Phase available indication provided.
    • Phase reverse indication provided.
    • 61/2 digits for direct kWh reading.
    • On site programmable CT ratio.
    • Reliable performance at Low Current(>5% of load).
    • Potential free pulse output for energy.
    • Flush mounting compact design.
    • Dip switch for programming functions on back side.

    Relevant Standard:
    • EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
    • Protection : Ip52 Front / Ip20 Terminal block.

    Available CT Ratio:
    • 5A, 10, 20, 30, 40, 50, 60, 75, 100, 150, 200, 250, 300, 400, 500, 600, 800, 1000, 1200, 1250, 1500, 1600, 2000, 3200, 5000.

    Environment:
    • Ambient: -10° C to 55° C.
    • Storage: -20° C to 70° C.
    • Humidity: <95% RH-Non condensing.

    Mechanical Dimensions:
    • Front: 96mm x 96mm / Depth 54mm
    • Panel Cut Out: 91mm x 91mm +-0.1mm
    • Casing: Flame retardant ABS.
    • Connector: ABS & Pcb terminal block.
    • Weight 250gm approximately.

    Applications:
    • Commercial and Industrial Sub Metering.
    • Special oem application.
    • Control and relay panels.
    • Genset, Solar applications.

    Other Details:
    • 61/2 digits mechanical non resettable stepper counter display.
    • Individual phase and current reversal led indication.
    • Optically isolated open collector pulse output.
    • Accuracy class 1s as per IEC 61036 / IS 13779
    Request
    Callback
    Yes! I am Interested
    View PDF

    EM-34L Nippen Multifunction Meter

    EM-34L Nippen Multifunction Meter
    • EM-34L Nippen Multifunction Meter
    Get Best Quote
    Approx. Price: Rs 1,200 / PieceGet Latest Price

    Product Details:

    Minimum Order Quantity1 Piece
    Operating Voltage80 - 500 V AC Line to Line at 45 - 65 Hz
    Power ConsumptionLess than 0.4VA in Current Circuit, Less than 0.4VA in Voltag
    CT Primary Ratio5-9999A AC (only primary to be set).
    Auxiliary SupplySelf Powered
    Power Factor0.8lead, Unity, 0.5lag
    System3phase 4wire / 3phase 3wire / 1phase 2 w
    PT Ratio110v to 500kv / 110
    Current50mA-6A AC
    BrandNippen

    The product has a 8 digit LCD display with backlit. It continuously displays kWh parameter. The kWh display is resettable using key function. It has rich high frequency led pulse output in front facia.

    Features:
    • True Rms measurement
    • Accuracy class 1s.
    • Accurate reading for balanced as well as unbalanced loads.
    • Accurate reading even under rapid fluctuation.
    • LCD display with yellow green backlit.
    • Phase available indication provided.
    • Phase reverse indication provided.
    • 8 digits for direct kWh reading.
    • On site programmable CT ratio and PT ratio.
    • Reliable performance at Low Current(>5% of load).
    • Potential free pulse output for energy.
    • Flush mounting compact design
    • Four switch for programming functions on front side.
    • Energy reset and password protection.
    • Old register to store the previously cleared energy value.
    • Once CTR, PTR programmed,the meter displays direct reading of kWh.

    Relevant Standard:
    • EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
    • Protection: Ip52 Front / Ip20 Terminal block.

    Environment:
    • Ambient: -10° C to 55° C
    • Storage: -20° C to 70° C.
    • Humidity: <95% RH - Non condensing.

    Mechanical Dimensions:
    • Front: 96mm x 96mm / Depth 54mm
    • Panel Cut Out : 91mm x 91mm +- 0.1mm
    • Casing: Flame retardant ABS.
    • Connector: ABS & Pcb terminal block. 
    • Weight 250gm approximately.

    Pulse Output:
    • 1pulse = 10 Wh x External CT ratio x External PT ratio.
    • Open collector pulse output.
    • External resistance to be used Dc supply and ‘+’ point.
    • External resistance value will vary depends on external voltage of 5V to 24V, which is given by user.
    • External resistance for 24 Dc is 6.4kilo ohm.

    Applications:
    • Commercial and Industrial Sub Metering.
    • Special oem application.
    • Control and relay panels.
    • Genset, Solar applications.
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
    • Port of Dispatch: Mumbai
    Yes! I am Interested
    View PDF
    X

    Explore more products



    Reach Us
    Jignesh Mehta (Proprietor)
    25, Shri Pushpamani Society, Zaver Road, Opposite Axis Bank
    Mulund West, Mumbai- 400080, Maharashtra, India



    Call Us

    Share Us

    F GT L


    Send E-mailSend SMS