Call 08046036121 82% Response Rate

our range

Power Factor Controller RVC

Offering you a complete choice of products which include power factor controller rvc/ rvt relay and automatic aluminium industrial apfc control panel.
  • Power Factor Controller RVC/ RVT RELAY
  • Power Factor Controller RVC/ RVT RELAY
  • Power Factor Controller RVC/ RVT RELAY
  • Power Factor Controller RVC/ RVT RELAY
  • Power Factor Controller RVC/ RVT RELAY
Power Factor Controller RVC/ RVT RELAY

Power Factor Controller RVC/ RVT RELAY

Rs 8,000  / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Operating Voltage100V to 440V
Dimension144x144 mm
Weight Approximate2
Measuring SystemMicro-processor system for balanced three-phase networks or single-phase networks
Switching SequencesUser defined.
Mode Of SwitchingThe mode of switching for all the programmable switching sequences is integral, direct, circular or
Saving-FunctionAll programmed parameters and modes are saved in a non-volatile memory.
Power Outage ReleaseQuick automatic disconnection in less than 20ms (50Hz) in case of power outage or voltage drop.
Power Outage Reset Delay Time40 s.
Operating Temperature-10dig C to 70dig C.
Storage Temperature- 30dig C to 85dig C.
Mounting PositionVertical panel mounting.
Dimensions144x144x43 mm (hxwxd).
Cut-Out Dimensions138x138 mm (hxw).
Voltage Tolerance+/- 10% on indicated operating voltages
Weight0.4 kg (unpacked).
ConnectorSpring clamp terminal block
Front Plate ProtectionIP43.
Relative HumidityMaximum 95%, non-condensing.
StandardsCE marked.
Frequency Range50 or 60 Hz +/- 5%
Current Input1A or 5A (RMS).
Current Input ImpedanceLess than 0.1 Ohm (recommended CT class 1.0, 10 VA min).
Consumption Of The Controller8 VA max.
Power Factor SettingFrom 0.7 inductive to 0.7 capacitive.
Starting current setting (C/k)0.01 to 3A. automatic measurment of C/k.
Switching Time Between StepsProgrammable from 1s to 999s (independent of reactive load).
RVC has become synonymous with automatic capacitor bank controller in many markets worldwide thanks to its distinct design, ease of use, reliability and versatile functions.Thanks to the user interface upgrade with graphical icons, it is possible to commission the RVC without a manual. A slimmer casing requires less space in the capacitor bank panel. The RVC is an easy-to-install, easy to use, smarter power factor controller and an ideal companion of your automatic capacitor banks.

Powerful Features:
  • Common range for a broad network voltages from 100V to
  • 440V.
  • Measurement and display of key parameters like voltage,
  • current, power factor, THDV and THDI.
  • Fully programmable switching sequence.
  • 1A or 5A current input.
  • Easy commissioning.
  • Complete auto set-up (starting current-C/k, type of switching sequence, phase shift, special connections).
  • Easy to use thanks to a user-friendly touchscreen interface and ease of access to parameters for manual setting.
  • Highly efficient switching strategy combining integral, direct and circular switching thereby allowing: to control the cos j in presence of rapidly varying loads, to reduce the number of switching, to avoid unnecessary intermediary switchings, to increase the lifetime of the capacitors and contactors.
  • Suitable for hot environments due to maximum ambient temperature rating of 70°C.
  • Not affected by harmonics.
  • Overvoltage / undervoltage protection and protections against harmonic distortion (THDV).
  • Alarm : an alarm contact is opened when any of these conditions are reached: the target cos j is not reached within 6 minutes after all outputs have been switched on, the internal temperature of the RVC rises above 85°C, overvoltage / undervoltage limits are reached, the power supply is out of range, the THDV exceeds the limits.


Programmable Parameters:

  • Target Power Factor (cos j)
  • Phase shift (for special connections)
  • C/k (starting current)
  • Switching delay times
  • Switching sequence
  • Additional features:
  • Switching strategy (linear or circular)
  • Regenerative cos j (target cos j when the load re-inject power on the network)


Automatic setting of:

  • Phase shift
  • C/k
  • Switching delay
  • Type of switching sequence


Easy commissioning with automatic recognition of:

  • Special connections (single-phase, CT leads)
  • Number of outputs
  • Type of switching sequence


Output Contact Rating:

  • Max. continuous current: 1.5A;
  • Max. peak current: 5 A;
  • Max. voltage: 440Vac;
  • Terminal A is rated for a continuous current of 16A.


Alarm Contact:

  • Normally open contact;
  • Max. continuous current: 5 A;
  • Rated/max. breaking voltage: 250Vac/440 Vac.


Number Of Outputs:

  • RVC-3: programmable up to 3 outputs - RVC-6: programmable up to 6 outputs
  • RVC-8: programmable up to 8 outputs - RVC-10: programmable up to 10 outputs
  • RVC-12: programmable up to 12 outputs


Article Numbers For Ordering:

  • RVC-3: 2GCA294983A0050
  • RVC-6: 2GCA294984A0050
  • RVC-8: 2GCA294985A0050
  • RVC-10: 2GCA294986A0050
  • RVC-12: 2GCA294987A0050


Other Features:

  • Overvoltage and undervoltage protection.
  • Autoadaptation to the phase-rotation of the network and the CT-terminals.
  • Not affected by harmonics.
  • Working with generative and regenerative loads.
  • LCD contrast automatically compensated with temperature

View Complete details

get quote request a call back
Automatic Aluminium Industrial APFC Control Panel

Automatic Aluminium Industrial APFC Control Panel

Rs 30,000  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

PhaseThree Phase
TypeLow Voltage
MaterialMild Steel
We are dealing and offering wide range of Automatic Aluminium Industrial APFC Control Panel panels  to our clients.

View Complete details

get quote request a call back