Burden | 0.2VA per phase & Less than 3VA max on Auxiliary supply. |
Dielectric Strength | 2 kv for 1min |
Brand | Nippen |
Operating Voltage | 80 - 500 V AC Line to Line at 45-65 Hz |
PT Ratio | 11kv , 22kv, 33kv , 66kv / 110v |
Current | 50mA-6A AC |
CT Ratio | 5-9999A AC (only primary to be set) |
Power Consumption | Less than 0.1VA in Current Circuit, Less than 0.1 VA in Voltage |
Auxiliary Supply | 230VAC default (+20%) 50Hz. |
Relay Rating | 5Amps 250Vac |
Our range of three-phase multi-function digital panel meters for measurement of electrical in industrial and commercial accurate and reliable parameters (voltage, current, power, frequency, etc) applications. It has a single line Red LED display which enables all parameters to be displayed.
Features:- Accuracy class 1s.
- True RMS measurements with perfect linear response.
- Single row of (10mm)7 segment led 4digit bright red display.
- 68 digit for energy.On site programmable CT ratio, PT ratio.
- Wide range of auxiliary supplies.
- Reliable performance at Low Current(>5% of load).
- Password Protection for setup mode.
- Finger proof self lifting terminals for connection of wiring.
- Auto scaling of kilo, mega led.
Relevant Standard:- EMC: IEC 61326 / Immunity: IEC 61000-4-3 / Safety: IEC 61010 -1-2001
- Protection: Ip52 Front / Ip20 Terminal block.
Programmable Setting:- CT Ratio Primary to be set,
- PT Ratio, Meter ID, MD, Password.
- Auto/Manual Scroll ON & OFF Mode.
Parameters Displayed:- VLN, VLL, Ampere, Frequency & Average , RPM.
- Active Power kW , Apparent Power kVA, Reactive Power(kVAr) Total.
- kWh, kVAh, Power Factor (PF) , Average , On hours.
Optional Features:- RS-485 serial output port with standard Modbus Rtu protocol.
Mechanical Dimensions:- Front: 96mm x 96mm / Depth 54mm
- Panel Cut Out: 91mm x 42mm +- 0.1mm
- Casing: Flame retardant ABS.
- Connector: ABS & Pcb terminal block.
Applications:- Commercial and Industrial Sub Metering.
- Switch gear panels.
- Control and relay panels.
- Power Control panels and Motor Control panels.
- Scada, Building Management system(BMS).
Other Details:- Measurement of all voltages and currents, power.
- Single line LED bright red display .
- Accuracy class 1s(IEC 1036/CBIP 88).
- Optional RS 485 port modbus RTU protocol.